Name |
Smart Muscle Stimulator |
Mode |
8 (20level) |
Output Strength |
0-20 |
Heat |
10-38℃ |
Material |
ABS+PU |
Working voltage |
3.7V/30mA |
Name |
Smart Muscle Stimulator |
Mode |
8 (20level) |
Output Strength |
0-20 |
Heat |
10-38℃ |
Material |
ABS+PU |
Working voltage |
3.7V/30mA |
working time |
15-25mins |
Battery cataicity |
1500mA |
Power |
3.7V Polymer lithium battery |
Body weight |
50g |
Size |
60*50*10mm |
Carton Package |
Device ,Manual , 1pc heat pad , 1 remote controlor USB charger wire |
Certificate | ISO13485, MDR |
The principle of EMS fitness is to transmit micro - current signals to the human
body through EMS equipment . The frequency of micro - current signals is in the
range of 40HZ to 2500HZ( It belongs to the middle and low frequency current ,
and can only impact the muscle layer ). The human body recognizes these current signals as human bio - electricity signal .
The signal can stimulate muscle contraction and achieve the purpose of reducingfat and slimming .
EMS provides users with a weight - free fitness method , which avoids the body
damage caused by traditional fitness method or lack of professional guidance .
The biggest advantage of EMS is high efficiency and low frequency . It is reported
that use high - quality EMS training massage patch for 20 minutes is equivalent to
120 minutes of exercise in the gym . Inferior massage patches can ' t do it well so
as to can ' t achieve goals of fitness and weight loss .
1. Take out the massage patch package and install the host on the massage pad.
2. Remove the transparent protective film from the massage patch .
3. Attach the massage patch installed on the host to the body part to be massaged .
4. Power - on operation ( shutdown state ): Long press " M " key for about two seconds to power on ,and the middle indicator lights up . Press the "+" key to increase the strength and start working . The indicator light blinks when working . The default startup strength is level 0.
5. Press the "-" key to reduce the strength .
6. Replacement mode : After starting , press " M " to select the mode , and then press "+" to increase the strength to start operation ; The mode can also be replaced in the working process . The default strength is level 1 after the mode is replaced . For heating , After power - on , press the " heating ' button to start the heating function . The heating level is "3", and the heating button increases with each press One gear , press the heating display icon to turn off the heating function .
7. Power off : Continue to press the "-" key to weaken the strength until the indicator light off .
8. After the machine is shut down , remove the massage patch and cover it with a transparent protective film . Install it and place it in a cool place .
Tip : When the host detects that the massagepatch leaves the skin for about 10 seconds , it will automatically shut down .
Do not use this product in the following parts , or it may cause physical problems :
① Brain and heart part .
② Surgical site where plastic surgery was performed .
③Above the neck and head .
④Implanting position with metal and plastic .
⑤Mucosal parts such as wounds , eyes , mouth , and genitals .
⑥The part of the hair removal treatment on that day .
⑦Abdomen during physiological period .
⑧Patient with implanted medical electronic device , such as heart rate regulator . Patient with medical electronic device , such as artificial heart and lung .
Patient with wearable medical electronic instruments such as an electrocardiograph scanner .
In the process of using , if you want to move the electrode pads to other parts or other people ' s body , please turn off the power before moving . If you feel unwell due to abnormal use of the product , stop using it immediately . If your body or skin feels uncomfortable , please consult your doctor and follow your doctor ' s advice .
Warning
Please consult your doctor before using in following situations :
Patient who is being treated by doctor and has a physical abnormality .
Malignant tumor patient .
Pregnant women and maternity .
Patient with heart , blood pressure disease and cranial nerve abnormality .
Patient who is taking medication and has a temperature above 38°℃. Patient with Infectious disease .
Patient with skin dysfunction or abnormal skin disease .
Patient with acute disease .
Patient who need to be rested .
Patient with abnormal bleeding .
Patient who are not free to express their wishes .
Patient with sensory impairment due to high peripheral circulatory disorders of diabetes .
Skin is allergic to electrode pads .
Children under 14 years can ' t use it .