Ecg recording papers are things like office supplies, just like printer cartridges, but they're consumables. Electrocardiogram drawing, a processing paper used with an electrocardiogram machine. First, the base paper is coated with a layer of carbon black as the base, and then coated with a layer of white paint, so that its surface is the same as ordinary white paper in appearance. And then print the grid. When the "hot head" of the ECG machine contacts the paper surface, the coating is melted open, showing a black line, and the corresponding corrugated line is obtained.
How to sort the medical recording papers:
1. Use of electrocardiogram drawings -- Electrocardiogram drawings are made of special thermal paper, which are often used in electrocardiogram machines, defibrillators, sports platers, electrocardiogram monitors, etc.
2, fetal monitor paper - the use of special thermal paper, often used in different brands of fetal monitors, commonly used brands are Dongyi, HP, Anke, Oxford and so on.
3, EEG paper - ECG drawings are made of special high-quality processing paper, which is often used for EEG, physiological recorder and evoked potential.
4, color inkjet, laser printing paper - the use of special waterproof, fog or smooth coated paper, often used in electronic endoscopy, pathology, inspection, X-ray, ECT, B-ultrasound and other departments of the computer workstation printing.
5, video printing paper - the use of special adhesive thermal paper or glossy photographic paper, recorded by chemical or thermal sublimation, often used in B-ultrasound room or electronic endoscope computer station.
6, other types of recording paper - ECG drawings use a variety of different specifications of white thermal paper, often used in electrical audiometry, inspection, ophthalmic optometry and other departments.
How to install ECG recording paper :
1, need to distinguish between warehouse type or reel type, warehouse unpacking, good direction, generally there are arrows to mark the upper and lower, no arrow to see the black induction point, generally in the lower part, no longer look at the two ends, red is the bottom, there is no upper part, and then pull a little in the outside to close the hatchcover. The roll is easy to do, like loading roll paper, take the old one down, replace a roll, the direction is good.
2, reel type ECG drawing operation is relatively simple, like loading roll paper, take down the old, replace a roll, the direction is good can be installed on. Warehouse ECG drawings need to be unpacked first, in a good direction, there are generally arrows to mark the upper and lower, no arrows to look at both ends, red is the bottom, no is the upper. Or look at the black sensor, usually on the lower part. Pull the bottom a little bit and close the hatch on the outside, and that's it.
3, warehouse unpacking, on the good direction, there is generally an arrow to mark the upper and lower, no arrow to see the black induction point, generally in the lower part, no longer look at the two ends, red is the bottom, no is the upper part, and then pull a little in the outside to close the hatch cover.
4, each ECG machine paper is slightly different. But most of the middle finger is on the right side of the machine. Which is when you're facing the machine on your left hand side. First, open the one with the paper. Then. Just put the paper in there.
Learn more at : www.gocengmed.com
